Extron electronic MVX 44, MVX 88, MVX 84, 48 manual Example 5 View ties by selecting outputs

Example 5: View ties by selecting outputs

In the following example, the video and audio, audio-only, and video-only ties in the current configuration are viewed by selecting various outputs. The example shows the front panel indications that result from your actions.

1.Select video and audio for viewing: If necessary, press and release the I/O button to cycle through the selections until the both LEDs light.

Press the button.

I/O

The video LED lights when video is selected. VID

The audio LED lights when audio is selected. AUD

NOTE: Allow the 5-second timeout to deselect the input buttons before you select

an output button. If an input button is still selected, the indications will not be as described and you may inadvertently establish potential ties that

could be created by pressing the Enter button.

If you do inadvertently establish a potential tie by selecting an input and output button, do not press the Enter button. Allow the 5-second timeout to deselect all input and output buttons.

2.Select an output: Press and release the output 3 button.

Press and release the Output 3 button.

OUTPUTS

1 2 3 4 5 6 7 8

The Output 3 LED lights to indicate that output 3 is selected and it is receiving video or video and audio. The source (or sources, if audio is broken away) is indicated by the Input LED(s).

The Output 1, Output 4, and Output 8 LEDs also light to indicate that they are receiving video from the indicated input. These unselected outputs may or not be receiving audio; you cannot tell from these indications.

INPUTS

5

The Input 5 LED lights to indicate that the video from this input is tied to output 3 (and to all the other lit outputs).

The audio LED blinks to indicate that, for at least one tie, audio is routed from a different source or not tied at all (audio breakaway).

I/O

VID +dB AUD-dB

3.Deselect audio: Press and release the I/O button.

The video LED lights when video is selected.

The audio LED is off when audio is deselected.

Press the button.

OUTPUTS

I/O 1 2 3 4 5 6 7 8

VID +dB

AUD -dB

The Output 3 LED lights to indicate that output 3 is selected and it is receiving video. The source is indicated by the Input LED(s).

The Output 1, Output 4, and Output 8 LEDs also light to indicate that they are receiving video from the indicated input.

INPUTS

5

The Input 5 LED lights to indicate that video from this input is tied to output 3 (and to all the other lit outputs).

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 19