Alpine DVA-5205P owner manual Turning the power on and off

Turning the power on and off

		N
	LD
O
V

VOL

UP

Turning the power on and off

	Press “POWER”.
	The power turns on.
		POWER
		NTSC/PAL
	Caution	When connected with an Alpine
		head unit
		If the DVA-5205P is connected to
		anything other than the CVA-1005R/IVA-
		M700R/IVA-C800R (for ex.: CVA-1000R),
		the default DVD setting must be
		changed. See page 36, “Custom setting
		– Changing the Ai-NET settings” to
		change the SETUP to CD mode and see
		page 38, “Custom setting – Changing
		the H.U. CONTROL settings” to change
		the SETUP to ON mode before using it.
POWER	To turn the power off, press
NTSC/PAL
	“POWER” again.
Play Position Memory Function	Notes:
• Even if you turn power off or switch the	• With this unit connected to an Ai-NET compatible
Ignition Key to OFF during playback or	head unit, there will be about a 3 second delay during
change the video source, playback will	power-up from the remote control. This is caused by
	the systems communications being carried out by the
continue from the point where playback
	various components and is not a defect.
stopped when the power is turned ON
	• When connected with an Ai-NET compatible head
again.	unit, the power cannot be turned off from the remote
The play position memory is released if	control unit. Turn off the DVA-5205P’s power by
the disc is removed or the Reset switch	switching the head unit’s source. For details, refer to
is pressed.	“Operating from the head unit” (page 56).

• Reading this manual

Tips

Stopping playback			These indicate the discs for which
Stopping	DVD		the function can be used.
		Video CD
playback		CD
			DVD ...DVDs

Press the stop button during playback to stop playback. That position is stored in the memory.

Press “ L” during playback.

CHG

• Using the PRE-STOP function (DVD, Video CD only)

Tips When the PRE-STOP function is used, the position at which playback is stopped is stored in the memory, and playback resumes from that position.

Press “ L” once during playback.

“PRE-STOP” is displayed.

Video CD ...Video CDs

CD ...Music CDs

This indicates supplementary explanation of operation of this system.

CHG

Press “ :” in the PRE-STOP mode.

Playback starts from the position at which it was stopped.

10