Alpine DVA-5205P owner manual Changing the default settings setup, Changing the language settings

SET UP

Changing the default settings (setup) Changing the language settings

ENT

DISP MENU SET

BAND

RTN V.OUT

Changing the default settings (setup)

The factory default settings can be changed to suit your personal prefer- ences and usage.

In the stop mode, press	DISP
“SET” for at least 2
seconds.	MENU
	SET
The default setting menu
appears.

Note: This operation cannot be performed in the PRE-STOP mode.

Use the “Joystick” to make the selection, then press “ENT”.

For the procedure after	ENT
selecting the setting item,	or
refer to the pages
indicated on the table below.

ENT

Item	Description	See
		page
LANGUAGES	Set the audio language, subtitle	→P24
	language and menu language.
TV SCREEN	Set the screen size according to	→P26
	the type of TV monitor being used.
COUNTRY	Set the country code when	→P27
CODE	setting the rating level.
RATING	Set the rating level (parental	→P28
LEVEL	lock).
DOWN	Takes DVD digital sound and	→P30
SAMPLING	converts it into 48 kHz/16 bit
	sampling digital sound.
DIGITAL OUT	Set the digital output.	→P32
LED	Set whether the front panel’s	→P34
INDICATOR	LED indicators are on or off.
CUSTOM	Set the Closed Caption and	→P35
SETUP	Ai-NET setting.

Note: When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicle’s battery is disconnected.

Changing the language settings

The audio language, subtitle language and menu language can be set according to your preferences.

Select “LANGUAGES” under “Changing the default settings (SET UP)” on page 24.

24