Network protocols setup, Filter sets ﬁrewalls

Network protocols setup

These screens allow you to conﬁgure your network’s use of the standard networking protocols:

■IP: Details are given in “IP Setup and Network Address Translation” on page 10-1.

■IPX: Details are given in “IPX Setup” on page 11-1.

■AppleTalk: Details are given in “AppleTalk Setup” on page 12-1.

Note: AppleTalk requires the optional AppleTalk feature expansion kit.

These screens allow you to conﬁgure security on your network by means of ﬁlter sets and a basic ﬁrewall.

■Details are given in “Security” on page 14-1.

These screens allow you to conﬁgure IP address serving on your network by means of DHCP, WANIP, BootP, and with the optional AppleTalk kit, MacIP.

■Details are given in “IP address serving” on page 10-21.

You can set the system’s date and time in the Set Date and Time screen.

Select Date and Time in the System Conﬁguration screen and press Return. The Set Date and Time screen appears.

Follow these steps to set the system’s date and time: