Netopia R7200 manual Console configuration

WAN and System Configuration 8-13

1.Select Current Date and enter the date in the appropriate format. Use one- or two-digit numbers for the month and day, and the last two digits of the current year. The date’s numbers must be separated by forward slashes (/).

2.Select Current Time and enter the time in the format HH:MM, where HH is the hour (using either the 12-hour or 24-hour clock) and MM is the minutes.

3.Select AM or PM and choose AM or PM.

Console configuration

You can change the default terminal communications parameters to suit your requirements.

To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.

Console Configuration

Baud Rate...	57600
Hardware Flow Control:	No

SET CONFIG NOW CANCEL

Follow these steps to change a parameter’s value:

1.Select the parameter you want to change.

2.Select a new value for the parameter. Return to step 1 if you want to configure another parameter.

3.Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters unchanged and exit the Console Configuration screen.