Netopia R7200 manual Manually distributing IP addresses, Using address serving, MacIP serving

B-8 User’s Reference Guide

■The Netopia R7200 releases the DHCP address back to the available DHCP address pool exactly one hour after the last-heard lease request. Some other DHCP implementations may hold on to the lease for an additional time after the lease expired to act as a buffer for variances in clocks between the client and server.

MacIP serving

Macintosh workstation (MacTCP or Open Transport):

Once the Mac workstation requests and receives a valid address, the Netopia R7200 actively checks for the workstation’s existence once every minute.

■For a dynamic address, the Netopia R7200 releases the address back to the address pool after it has lost contact with the Mac workstation for over 2 minutes.

■For a static address, the Netopia R7200 releases the address back to the address pool after it has lost contact with the Mac workstation for over 20 minutes.

Netopia R7200 MacIP server characteristics

The Mac workstation uses ATP to both request and receive an address from the Netopia R7200's MacIP server. Once acquired, NBP confirm packets will be sent out every minute from the Netopia R7200 to the Mac workstation.

Manually distributing IP addresses

If you choose to manually distribute IP addresses, you must enter each computer’s address into its TCP/IP stack software. Once you manually issue an address to a computer, it possesses that address until you manually remove it. That’s why manually distributed addresses are called static addresses.

Static addresses are useful in cases when you want to make sure that a host on your network cannot have its address taken away by the address server. Appropriate candidates for a static address include a network administrator’s computer, a computer dedicated to communicating with the Internet, and routers.

Using address serving

The Netopia R7200 provides three ways to serve IP addresses to computers on a network. The first, Dynamic Host Configuration Protocol (DHCP), is supported by PCs with Microsoft Windows and a TCP/IP stack. Macintosh computers using Open Transport and computers using the UNIX operating system may also be able to use DHCP. The second way, MacIP, is for Macintosh computers. The third way, called Serve Dynamic WAN Clients (IPCP), is used to fulfill WAN client requirements

The Netopia R7200 can use both DHCP and MacIP. Whether you use one or both depends on your particular networking environment. If that environment includes both PCs and Macintosh computers that do not use Open Transport, you need to use both DHCP and MacIP to distribute IP addresses to all of your computers.

Serve dynamic WAN clients

The third method, used to fulfill WAN client requirements, is called Serve Dynamic WAN Clients. The correct term or protocol is a subset of the PPP suite call IPCP. Originally, this would apply only to switched WAN interface routers, and not to leased line routers. However, a new feature can give you Asynchronous PPP dial-in support on the Auxiliary port on any router including leased line Netopia routers.