Datalink PPP/MP Options Data Compression | Netopia R7200 instruction

WAN and System Conﬁguration 8-5

6.Toggle or enter any IPX Parameters you require and return to the Add Connection Proﬁle screen by pressing Escape. For more information, see “IPX Setup” on page 11-1.

7.Select Data Link Encapsulation and press Return. From the pop-up menu select either PPP or RFC1483. If you select PPP, the Data Link Options menu item is displayed; if you select RFC1483, the Data Link Options item is hidden.

8.If you chose PPP as your data link encapsulation method in the previous step, select Datalink Options and press Return. The Datalink Options screen appears.

Datalink (PPP/MP) Options

Data Compression...	Standard LZS
Send Authentication...	PAP
Send User Name:
Send Password:
Receive User Name:
Receive Password:

Maximum Packet Size:

1500

In this Screen you will configure the PPP/MP specific connection params.

Select Data Compression and press Return. The pop-up menu offers the choices of None, Ascend LZS, or Standard LZS (the default). Unless you are otherwise speciﬁcally directed, you can accept the default.

Select Send Authentication and press Return.

From the pop-up menu that appears, select the authentication method your ISP uses, if any: PAP (Password Authentication Protocol), CHAP (Challenge Handshake Authentication Protocol), PAP-TOKEN, CACHE-TOKEN, or None.

■PAP is the most common, and requires you to enter a User Name and Password in the next two ﬁelds.

■CHAP requires you to enter a Host Name and Secret in the next two ﬁelds.

■PAP-TOKEN requires you to enter a User Name in the next ﬁeld.

■CACHE-TOKEN requires you to enter a User Name and Password in the next two ﬁelds.

You can specify user name and password for both outgoing and incoming calls. the Send User Name/Password parameters are used to specify your identity when connecting to a remote location. The Receive User Name/Password parameters are used when receiving dial-in clients such as via RAS conﬁguration.

9.You can edit the Maximum Packet Size ﬁeld, if you want packets limited to a lower value than 1500. Return to the Add Connection Proﬁle screen by pressing Escape.

Image 61

Netopia R7200 manual Datalink PPP/MP Options Data Compression

Contents

Netopia R7200 Sdsl Router Part Number Contents Part II Advanced Configuration Contents Aurp Snmp Xmodem Part III Appendixes User’s Reference Guide Part I Getting Started User’s Reference Guide Chapter Introduction Features and capabilitiesOverview How to use this guide Finding an Internet service provider Chapter Setting Up Internet Services Unique requirements Setting up a Netopia R7200 account Obtaining an IP addressPricing and support Endorsements Deciding on an ISP account Local LAN IP address information to obtain Obtaining information from the ISPWith Network Address Translation Without Network Address Translation User’s Reference Guide Find a location Chapter Making the Physical Connections What you need Identify the connectors and attach the cables Your router on Netopia R7200 Sdsl Router back panel ports Netopia R7200 LED front panel Netopia R7200 Sdsl Router status lights Readying computers on your local network Chapter Connecting to Your Local Area Network User’s Reference Guide Connecting to an Ethernet network 10Base-T Adding an external modem Connecting to a LocalTalk network Chapter Setting up your Router with the SmartStart Wizard Before running SmartStart SmartStart Wizard conﬁguration screens Setting up your Router with the SmartStart Wizard Easy option Advanced setup Advanced option Conﬁguration screen on Conﬁguration tab Dynamic conﬁguration recommended Static conﬁguration optional Add. Repeat this process for the secondary DNS TCP/IP Conﬁguring TCP/IP on Macintosh computers TCP/IP or MacTCP Dynamic conﬁguration using MacIP optional Setting up your Router with the SmartStart Wizard User’s Reference Guide Chapter Console-Based Management Connecting through a Telnet session Conﬁguring Telnet software Connecting a console cable to your router PC ANSI-BBS Navigating through the console screens Easy Setup console screens Chapter Easy SetupAccessing the Easy Setup console screens See Appendix A, Troubleshooting, for more suggestions Quick Easy Setup connection path Main Menu appears Sdsl Line Conﬁguration Previous Screen Next Screen Easy Setup Proﬁle IP Easy Setup Easy Setup Security Conﬁguration Previous Screen To Main Menu Part II Advanced Configuration User’s Reference Guide WAN conﬁguration Chapter WAN and System Configuration ATM VPI ATM VCI Creating a new Connection Proﬁle IPX Profile Parameters Remote IPX Network Datalink PPP/MP Options Data Compression Default proﬁle Main Menu Default Proﬁle screen appears IP parameters default proﬁle screen System conﬁguration screens IPX parameters default proﬁle screen Navigating through the system conﬁguration screens System conﬁguration features Filter sets ﬁrewalls Network protocols setupIP address serving Date and time Console conﬁguration Snmp Simple Network Management Protocol Upgrade feature setSecurity Logging Installing the Syslog client User’s Reference Guide Chapter Line Backup Backup Conﬁguration screen appears Atdt Backup Conﬁguration screen IP Setup screen Connection Proﬁles Using Scheduled Connections with Backup Scheduled Connections screen appears Management/Statistics Force Recovery Event Logs QuickViewSnmp Support User’s Reference Guide Network Address Translation features Chapter IP Setup and Network Address Translation HOW NAT Works Previous Screen Using Network Address Translation V2 multicast Numbered Sdsl WAN1 Associating port numbers with nodes Advanced IP/IPX router conﬁguration options Data Link Options IP Setup and Network Address Translation Network Address Translation guidelines IP setup User’s Reference Guide Select Add Export. The Add Exported Service screen appears Select Service. a pop-up menu of services and ports appears IP subnets User’s Reference Guide Static routes Viewing static routes Static Routes screen will appear Adding a static route Modifying a static route Rules of static route installationDeleting a static route Main Menu System Configuration IP Address Serving 176.163.222.10 Dhcp NetBios Options Serve Bootp Clients IP Address Pools IP Setup and Network Address Translation Dhcp NetBIOS Options NetBios Type MacIP KIP forwarding setup You have ﬁnished your IP setup User’s Reference Guide IPX features Chapter IPX SetupIPX deﬁnitions Internetwork Packet Exchange IPX IPX address Service Advertising Protocol SAPSocket Routing Information Protocol RIP IPX setup screen NetBIOSIPX spooﬁng Default Gateway Address IPX routing tables User’s Reference Guide AppleTalk networks Chapter AppleTalk SetupAppleTalk protocol AT Routing Table Routers and seeding MacIP Installing AppleTalk Upgrade Feature Set Conﬁguring AppleTalk EtherTalk setup LocalTalk setup Viewing Aurp partners Aurp setupAurp Free Trade Zone Modifying an Aurp partner Adding an Aurp partner Receiving Aurp connections Deleting an Aurp partnerConﬁguring Aurp Options Aurp Options Tickle Interval Hhmmss User’s Reference Guide Quick View status overview Chapter Monitoring Tools General status Status lights Current status General Statistics Statistics & Logs Physical Interface Event historiesNetwork Interface WAN Event History Device Event History Routing tables IP routing table IPX Sap Bindery table IPX routing tableAppleTalk routing table Served IP Addresses IP Address Lease Management screen appears Snmp System Information Community strings Snmp Setup screen Snmp traps Viewing IP trap receivers Setting the IP trap receiversModifying IP trap receivers Deleting IP trap receivers Web-based management pages Event History pages WAN Event History Device Event History User’s Reference Guide Suggested security measures Chapter SecurityUser accounts Protecting the conﬁguration screens Protecting the Security Options screen Dial-in console access Telnet access Enable SmartStart/SmartView/Web serverAbout ﬁlters and ﬁlter sets What’s a ﬁlter and what’s a ﬁlter set? Filter priority How ﬁlter sets work How individual ﬁlters work Parts of a ﬁlter ﬁltering rulePort numbers Other ﬁlter attributes Port number comparisons UDP Putting the parts together Filtering example #2 Filtering example #1 Disadvantages of ﬁlters Design guidelines Working with IP ﬁlters and ﬁlter sets An approach to using ﬁlters Naming a new ﬁlter set Adding a ﬁlter set Adding ﬁlters to a ﬁlter set Input and output ﬁlters-source and destination ADD this Filter NOW Cancel Viewing ﬁlters Viewing ﬁlter setsModifying ﬁlters Deleting ﬁlters Deleting a ﬁlter set Modifying ﬁlter setsSample IP ﬁlter set TCP Icmp UDP Possible modiﬁcations User’s Reference Guide IPX ﬁlters Viewing and modifying packet ﬁlters IPX packet ﬁltersAdding a packet ﬁlter Deleting a packet ﬁlter IPX packet ﬁlter setsViewing and modifying packet ﬁlter sets Adding a packet ﬁlter set No Match Deleting a packet ﬁlter set IPX SAP ﬁltersViewing and modifying SAP ﬁlters Deleting a SAP ﬁlter Adding a SAP ﬁlter Viewing and modifying SAP ﬁlter sets IPX SAP ﬁlter setsAdding a SAP ﬁlter set Deleting a SAP ﬁlter set Basic IP packet components Firewall tutorial General ﬁrewall termsBasic protocol types Example TCP/UDP Ports Firewall design rulesFirewall Logic Logical and function Binary representation Established connections Implied rulesExample IP ﬁlter set screen Example network Filter basics Example Example ﬁlters Example Example Chapter Utilities and Diagnostics Ping Receive return Ping packet Stop Ping Trace Route Telnet client Disconnect Telnet console session Factory defaults Updating ﬁrmware Transferring conﬁguration and ﬁrmware ﬁles with Tftp Downloading conﬁguration ﬁles Transferring conﬁguration and ﬁrmware ﬁles with Xmodem Uploading conﬁguration ﬁles Idle Do you want to send a saved configuration to your Netopia? Restarting the system Part III Appendixes User’s Reference Guide Conﬁguration problems Appendix a Troubleshooting Network problems Console connection problems Power outages How to reset the router to factory defaults Technical support How to reach usBefore contacting Netopia Environment proﬁle FAX-Back Online product information User’s Reference Guide Appendix B Understanding IP Addressing What is IP?About IP addressing Subnets and subnet masks Subnet masks Example Using subnets on a Class C IP internet ISP Network Network conﬁguration Distributing IP addresses Example Working with a Class C subnetBackground Technical note on subnet masking Conﬁguration Netopia R7200 Dhcp server characteristicsDhcp address serving Manually distributing IP addresses Using address servingMacIP serving Serve dynamic WAN clients Understanding IP Addressing B-9 Tips and rules for distributing IP addresses Dhcp example Internet Nested IP subnets 0.0 C.1 WAN 3719 Packet header types Broadcasts User’s Reference Guide Network conﬁguration Appendix C Understanding Netopia NAT BehaviorBackground User’s Reference Guide Understanding Netopia NAT Behavior C-3 Netopia Router WWW Server ISP Router LAN Understanding Netopia NAT Behavior C-5 Exported services Important notes Understanding Netopia NAT Behavior C-7 Summary Appendix D Binary Conversion Table Decimal Binary Appendix E Further Reading User’s Reference Guide Further Reading E-3 User’s Reference Guide Pinouts for Auxiliary port modem cable Appendix F Technical Specifications and Safety Information Description Power requirementsEnvironment Software and protocols Regulatory notices Agency approvalsNorth America International Declaration for Canadian users Important safety instructions Battery Telecommunication installation cautions Appendix G About Sdsl User’s Reference Guide Glossary User’s Reference Guide Glossary User’s Reference Guide Remapping See network number remapping User’s Reference Guide Glossary User’s Reference Guide Numerics Index Index-2 Index-3 Index-4 Index-5 Index-6 Limited Warranty and Limitation of Remedies User’s Reference Guide