Netopia R7200 manual Quick Easy Setup connection path

Easy Setup 7-3

Quick Easy Setup connection path

This section may be all you need to do to configure your Netopia R7200 SDSL Router to connect to the Internet.

Most ISPs will supply you with several parameter values for you to enter in the router. The ISP will provide the values shown below:

Parameter:		Your value:
Data Link Encapsulation	RFC1483 (default) or
	PPP (optional)
Local WAN IP Address	n/a
Local WAN IP Mask	n/a
Default IP Gateway	n/a
Domain Name	n/a
Primary Domain Name Server	n/a
User Name	n/a
Password	n/a

(If you want to record these values, you can print this page and use the spaces above.)

If your ISP assigns your Router a Static IP address, do the following:

1.Open a Telnet session to 192.168.1.1 to bring up the Main Menu.

If you don't know how to do this, see “Connecting through a Telnet session” on page 6-2.

Alternatively, you can connect the console cable and open a direct serial console connection, using a terminal emulator program. See “Connecting a console cable to your router” on page 6-3.