![](/images/new-backgrounds/1118988/118988119x1.webp)
8-4 User’s Reference Guide
3.Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
IP Profile Parameters
Address Translation Enabled: | Yes |
Local WAN IP Address: | 0.0.0.0 |
Remote IP Address: | 0.0.0.0 |
Remote IP Mask: | 0.0.0.0 |
Filter Set... |
|
Remove Filter Set |
|
Receive RIP: | Off |
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
4.Toggle or enter any IP Parameters you require and return to the Add Connection Profile screen by pressing Escape. For more information, see “IP Setup and Network Address Translation” on page
5.If you will be connecting with an IPX remote network, toggle IPX Enabled to Yes, and press Return. Otherwise, accept the default No.
If you enable IPX routing, an IPX Profile Parameters menu item becomes available. Select IPX Profile Parameters and press Return. The IPX Profile Parameters screen appears.
IPX Profile Parameters |
|
Remote IPX Network: | 00000000 |
Path Delay: | 10 |
NetBios Packet Forwarding: | Off |
Incoming Packet Filter Set... | <<NONE>> |
Outgoing Packet Filter Set... | <<NONE>> |
Incoming SAP Filter Set... | <<NONE>> |
Outgoing SAP Filter Set... | <<NONE>> |
Periodic RIP Timer: | 60 |
Periodic SAP Timer: | 60 |
Configure IPX requirements for a remote network connection here.