Alpine DVI-9990 Lock Pin Removal, JAPANESE CAR Front Frame, Ground Lead, Screws M5 x, Included

3

Slide the DVI-9990 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Lock Pin

Removal

1Remove the DETACHABLE FRONT PANEL.

2Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

3Pull the unit out, keeping it unlocked as you do so.

< JAPANESE CAR >

Front Frame

	DVI-9990
Ground Lead	Screws (M5 x 6)
	(Included)

★

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (★) already attached to the vehicle's chassis.

7-EN