Alpine iDA-305 Indication for USB memory, Indication for Portable audio player Mode, 38-EN

•The iPhone/iPod is not verified.

-Reset the iPhone/iPod.

-Try another iPhone/iPod.

Indication for USB memory

Indication for Portable audio player Mode

Current Error

•Abnormal current is run to the USB connector device (an error message may be displayed if the USB device that is not compatible with the unit is connected).

- Attempt to connect another Portable audio player.

Current Error

•Abnormal current is run to the USB connector device (an error message may be displayed if the USB device that is not compatible with the unit is connected).

USB memory is a malfunction or it is shorted. - Connect another USB memory.

USB Device Error

•A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit.

No USB Device

•A USB memory is not connected.

-Make sure the USB memory device is correctly connected and the cable is not excessively bent.

•No song (file) is stored in the USB memory.

-Connect the USB memory device after storing songs (files).

•A sampling rate/bit rate not supported by the unit is used.

-Use a sampling rate/bit rate that is supported by the unit.

•A copy-protected WMA file was played back.

-You can only play back non-copy-protected files.

USB Device Error

•A Portable audio player that is not supported by the unit is connected.

- Attempt to connect another Portable audio player.

No USB Device

•A Portable audio player is not connected.

-Make sure the Portable audio player is correctly connected and the cable is not excessively bent.

•There are no songs in the Portable audio player.

-Download songs to the Portable audio player and connect to this unit.

No Support

•Text information that is no supported on the unit has been input.

-Use an Portable audio player in which text information is input that is supported on the unit.

•A sampling rate/bit rate not supported by the unit is used.

-Use a sampling rate/bit rate that is supported by the unit.

•A copy-protected WMA file was played back.

-You can only play back non-copy-protected files.

-Make sure the Portable audio player is set to MTP.

No Support

•Text information that is not recognizable by the unit has been input.

-Use a USB memory device with input text information that is supported by the unit.

38-EN

•Communication error

-Turn the ignition key off, and then set to ON again.

-Verify in the display after reconnecting the Portable audio player to the connection cable.

•Caused by the Software Version not being compatible with this unit.

-Update the Portable audio player Software Version. For details, refer to the Owner’s Manual of player.

-Reset the Portable audio player.