Indication for CD Changer |
| Indication for SAT Receiver Mode |
•Protective circuit is activated due to high temperature.
-The indication will disappear when the temperature returns to normal operating range.
•Malfunction in the CD Changer.
-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.
•A disc is left inside the CD Changer.
-Press the eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
•No magazine is loaded into the CD Changer.
-Insert a magazine.
•No indicated disc.
-Choose another disc.
(XM mode)
(SIRIUS mode)
•The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module.
-Check whether the XM or SIRIUS antenna cable is attached securely to the XM or SIRIUS radio module.
(SIRIUS mode)
•Radio is being updated with latest encryption code.
-Wait until encryption code is being updated. Channels 0 and 1 should function normally.
(XM mode)
(SIRIUS mode)
•XM or SIRIUS signal is too weak at the current location.
-Wait until the car reaches a location with a stronger signal.
•Radio is acquiring audio or program information.
-Wait until the radio has received the information.
(XM mode)
(SIRIUS mode)
•The channel currently selected has stopped broadcasting. - Select another channel.
(XM mode)
(SIRIUS mode)
•The user has selected a channel number that is not available. - The unit will revert back to the previously selected channel.
(XM mode)
(SIRIUS mode)
•The user has selected a channel number that is not subscribed to.
-The unit will revert back to the previously selected channel.
•If an error or other problem occurs.
-Change channels or consult your Alpine dealer.
