Alpine MRP-T130, MRP-F320, MRP-F200 specifications Specifications

SPECIFICATIONS

	MRP-F320		MRP-F200	MRP-T130
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20 kHz)
Per channel into 4 ohms	40W		40W	50W
			0.08% THD
Per channel into 2 ohms	50W		50W	65W
			0.3% THD
Bridged into 4 ohms	100W
	120W		100W	130W
	(Subwoofer, 20 to 200 Hz)
			0.3% THD
Max. Power Output (at 14.4V)
Per channel into 4 ohms	75W		75W	90W
Bridged into 4 ohms	180W		180W	240W
Frequency Response			10 Hz to 50 kHz
			(+0, –1 dB)
Signal-to-Noise Ratio			100 dB
			(referenced to rated power)
Slew factor			Greater than 5
Input Sensitivity		200 mV to 4.0 V (1.0 V at center detent)
(for rated power output)
Input Impedance			10k ohms <
Speaker Impedance		4 or 2 ohms (Stereo), 4 ohms (Bridged)
Active Dividing Network	80 Hz, 18 dB per octave
Frequency and Slope	(HP. CH1 – 4)
			80 Hz, 18 dB per octave
	50 – 200 Hz, 12 dB per octave
	(LP. Subwoofer)
Power Requirement		11 – 16 VDC Negative Ground
Bass EQ			50 Hz + 8 dB FIX
	(CH 5 only)		(CH 3/4)
Dimensions (W x H x D)
MRP-F320			230mm x 58mm x 275mm (9" x 2-1/4" x 10-13/16")
MRP-F200			230mm x 58mm x 230mm (9" x 2-1/4" x 9")
MRP-T130			230mm x 58mm x 170mm (9" x 2-1/4" x 6-3/4")
Weight
MRP-F320				3.42 kg (7 lbs. 8 oz)
MRP-F200				2.93 kg (6 lbs. 7 oz)
MRP-T130				2.24 kg (4 lbs. 15 oz)
NOTE:

For product improvement, specifications and design are subject to change without notice.