Alpine TME-M710 owner manual Temperature, Fuse Replacement, Maintenance, Installation Location

Models: TME-M710

1 24
Download 24 pages 62.31 Kb
Page 4
Image 4

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between

+45°C (+113°F) and 0°C (+32°F) before turning your unit on.

Fuse Replacement

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder. If the fuse(s) blows more than once, carefully check all electrical connections for shorted circuitry. Also have your vehicle’s voltage regulator checked.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

Installation Location

Make sure the TME-M710 will not be exposed to:

Direct sun and heat

High humidity

Excessive dust

Excessive vibrations

After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal.

Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.

3-EN

Page 4
Image 4
Alpine TME-M710 owner manual Temperature, Fuse Replacement, Maintenance, Installation Location