Basic Operation

3Color depth adjustment (COLOR)

Change depth can be adjusted from –15 (MIN) to +15 (MAX).

*Adjustment cannot be made in the NAVIGATION (RGB connection) mode.

4Tint tone adjustment (TINT)

Tint tone can be adjusted from G15 (G MAX) to R15 (R MAX).

*Adjustment cannot be made in the NAVIGATION (RGB connection) mode.

5Contrast adjustment (CONTRAST)

Contrast can be adjusted from –15 (LOW) to +15 (HIGH).

6Screen quality adjustment (SHARP)

Screen quality can be adjusted from –15 (SOFT) to +15 (HARD).

*Adjustment cannot be made in the NAVIGATION (RGB connection) mode.

If 2 to 6 are adjusted, VISUAL EQ mode in 1 changes to “CUSTOM”.

7Dimmer adjustment (DIMMER)

AUTO : Turning on/off the headlight switches the screen brightness between DIMMER HI LEVEL and DIMMER LO LEVEL.

LOW : The backlighting is set to the value adjusted at “DIMMER LO LEVEL”.

HIGH : The backlighting is set to the value adjusted at “DIMMER HI LEVEL”.

8Dimmer HIGH level adjustment (DIMMER HI LEVEL)

Adjusts the HIGH LEVEL (16 (MIN) to 31 (MAX)) of the dimmer.

9Dimmer LOW level adjustment (DIMMER LO LEVEL)

Adjusts the LOW LEVEL (0 (MIN) to 15 (MAX)) of the dimmer.

pChange sound output (SOUND OUT)

MONITOR

: Outputs sound through the

 

built-in speakers.

HEADPHONE

: Outputs sound to

 

headphones if connected.

*Note that sound will not be output unless the audio output settings are appropriate.

6-EN

Page 7
Image 7
Alpine TME-M710 owner manual Monitor