Adjusting the Minimum Level of
Backlight (Dimmer Low Level)
Min (0) to Max (16) (Default Setting: Min)
If Low is set in “Setting the Brightness of the Backlighting (Dimmer)” (page 11), you can adjust the brightness of the backlighting. This function can be used, for instance, to change the screen brightness while traveling at night.
Changing the Base Color
Blue / Green / Red / Amber
Select your favorite base color. The default color is blue. See navigation owner's manual to synchronize the base color of navigation system
Beep Function
On (Default Setting) / Off
On: Activates the beep when the button is pressed.
Off: Deactivates the beep. The beep will not be produced when a button on the unit is pressed.
Adjusting the Touch Panel (Screen
Alignment)
You must adjust the touch panel when the display position on the LCD and the touch position on the touch panel do not match.
1Touch [ 
].
The adjustment screen appears.
Screen Adjustment
2Press and hold the center of [ 
] mark
accurately and follow [ | ] mark as |
appeared on the screen. |
|
When the adjustment is completed, the Display Setup Mode screen is displayed.
AUX Setup Operations
Adjusts the AUX display setting. Refer to page 14 for details.
Returns to the factory default settings of AUX setup. The message, "Restore default settings?" appears. Touch "Restore" to go back to the default settings.
Source Name
Aux / DVD / DVD-HU / DVB-T / iPod / TV / Sirius TV
Select the name from the following list, to be used for the product using the AUX input mode. This will apply to the button name on Source Select screen and the source name in title bar on AUX screen.
Setting the TV System
Auto / NTSC / PAL
The TV/Video system can be manually switched.
Setting the Video Signal
Composite /
The Video Signal selection menu is only available in AUX source. AUX must be connected with either Composite cable or
Changing Sound Output (DVD-HU Vol. Control)
Off / On
Off: Outputs sound through the
On: The
