![](/images/new-backgrounds/1242975/24297545x1.webp)
1
2
3
4
5
6
7
8
ACC (+12V) | Red | Connect to vehicle accessory / ignition |
GND | Black | Connect to vehicle ground line |
REMOTE | White/Brown | Remote out for controlling peripherals |
White/Pink | “Monitor Control” activate while S3 remote function is used | |
REVERSE | Orange/White | Switch to rearview camera screen |
FOOT BRAKE | Yellow/Black | Enables displaying video or operating setup (For front use) |
HAND BRAKE | Yellow/Blue | Enables displaying video or operating setup (For front use) |
PARKING BRAKE | Yellow/Blue | Enables displaying video or operating setup (For rear use) |
|
| For USA, parking brake wire pin is for rear seat entertainment use. It is not |
|
| connected at factory for US model. The wire pin is included in a bag with |
|
| a caution note. |
|
| For other regions, parking brake wire pin is connected at factory. Foot and |
|
| hand brake wires are not necessary. |
9POWER CONNECTOR
=RGB CABLE
ACAMERA INPUT TERMINAL
B
CRCA EXTENSION CABLE
Lock-out Function
To watch AUX device or operate setup functions, the
1Bring your vehicle to a complete stop at a safe location. Engage the hand brake.
2Keep pushing the foot brake and release the hand brake once then engage it again.
3When the hand brake is engaged for the second time, release the foot brake.
Now, the locking system for the AUX mode operation has been released. Engaging the hand brake can reactivate the AUX mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of
•If you try to activate the auxiliary device while driving, the display will show the