Alpine TME-S370 manual Information, Case of Difficulty, 15-EN

Adjusting Picture Contrast

Low (-15) to High (+15) (Default Setting: 0)

Touch [▲ ] or [ ▲] adjust object contrast on the screen. When it reaches the minimum or maximum contrast level, the display shows “Low” or “High,” respectively.

Adjusting Picture Sharpness

Soft (-15) to Hard (+15) (Default Setting: 0)

Touch [▲ ] or [ ▲] adjust the sharpness or clarity of the edge of an object appearing on the screen. When it reaches the minimum or maximum sharpness level, the display shows “Soft” or “Hard,” respectively.

Visual EQ Mode

Off (Default Setting) / Night Movie / Soft / Sharp / High Contrast

Off: The default setting.

Night Movie: Suitable for movies containing dark scenes.

Soft: Suitable for CGs and animated fi lms.

Sharp: Suitable for old movies where images are not clearly shown.

High Contrast: Suitable for recent movies.

•When any picture setting is changed, the Visual EQ item name is changed to “Custom.”

Reset Display Setting

Reset only affects the individual display setup sources. Any picture setting can be reset without affecting the other settings.

When pressing the Reset button, the message, "Reset display values to default?" appears. Press "Reset" to go back to the factory setting.

Information

In Case of Difficulty

If you encounter a problem, please turn the unit power off, then on again, or turn the vehicle ACC off, then on again.

If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle’s ignition is off.

If connected according to the instructions, the unit will not operate with the vehicle’s ignition off.

•Improper power lead connections. Check power lead connections.

No sound or unnatural sound.

•Connections are not properly or securely made. Check the connections and firmly connect.

Screen not displayed.

•Brightness control is set at the minimum position. Adjust the Brightness control.

•Temperature in the vehicle is too low. Increase the vehicle’s interior temperature to operation temperature range.

•Connections to the DVD, navigation system are not securely made.

Check the connections and firmly connect.

Navigation system inoperative.

•Connections to the navigation system are incorrect. Check the connections with the navigation system and connect the cables correctly and firmly.

15-EN