Step 9
Reattach the rear panel by using a 5/32” hex key to replace the bolts around the perimeter of the rear panel.
Step 10
Reconnect the horn assembly wires as before, ensuring that the dark (blue) wire is connected to the negative terminal and that the light (yellow) wire is connected to the positive (+) terminal. The positive (+) terminal is marked and is on the right side of the terminal block. Improper wiring of the horn assembly may result in the speakers being out of phase.
Step 11
Insert grill over the bass reflex port.
030519 A7 Owner's Manual | 5 |
