Altec Lansing ATP3 specifications Description, Use of Controls See Figure

Description

The ATP3 is an amplified speaker system featuring a subwoofer for extended low frequency response. The system is especially designed for multimedia computer applications. The unit is comprised of a subwoofer and two satellite speakers, and features separate VOLUME, BASS and TREBLE controls. The satellite speakers are uniquely designed to provide full tweeter and mid-bass response in a slim profile housing that complements flat panel as well as standard monitors. The satellite speakers are magnetically shielded and can be placed close to a monitor without distorting images.

Placement of the Speakers and Subwoofer

All stereo information is heard from the satellite speakers. The satellite speakers are magnetically shielded and can be placed close to the monitor without distorting images. Best stereo effect is obtained by placing the satellite speakers as far apart as practical. The subwoofer contains no stereo information and sound is non-directional. As a result, the subwoofer does not have to be placed in any particular relation to the satellite speakers. Placing the subwoofer on the floor close to a wall or corner of a room provides maximum bass efficiency. The subwoofer is not magnetically shielded and should not be placed close to the monitor

Use of Controls (See Figure 1)

on and counter-clockwise to turn power	Figure 1
off.
Volume Control: Turn the Volume
Control clockwise to increase overall
volume level. Turn counter-clockwise to
decrease volume.
Bass Control: The Bass Control adjusts
the volume level of the low subwoofer
frequencies. To increase Bass, turn the
control clockwise. To decrease Bass, turn
the control counter-clockwise.
Treble Control: Treble frequencies are
emitted from the satellite speakers. To
increase treble (high frequencies), turn
the control clockwise. To decrease treble,
turn the control counter-clockwise.
Notice: To avoid a “pop” sound when
pulling out the power plug from the AC
outlet or turning off power from a master
switch, first turn off the ATP3 with the
ON/OFF switch.

Power On/Off: The ON/OFF switch is part of the volume control. Turn the volume control clockwise to turn power