SPECIAL APPLICATION
7.[STAT]
This command displays the status of the
Command Format: [STAT] or [STATCi] Ci = Unit ID (i = # from 0 to 99) Example 1:
Send the command [STATC1] and receive feedback showing the status of unit ID 1.
Example 2:
Send the command [STAT] and receive feedback showing the status of the unit connected to the
8.[STATS]
This command displays the status of the
Command Format: [STATS] or [STATCiS] Example:
Send the command [STATS] and receive feedback as in the previous example, but in this case the settings will be saved and recalled when the same input is selected using the [INR] command.
9.[CLR]
Reset all parameters to factory defaults. Command Format: [CLRCi]
Ci = Unit ID (i = # from 0 to 99) Example:
Send the command [CLR] to reset the unit to the factory defaults. After reset, the status will similar to the following depending on the input selected:
Input: | Default |
Output Resolution: 640x480 | Last Saved |
Brightness: 24 | Last Saved |
Contrast: 40 | Last Saved |
Color: 24 | Last Saved |
Sharpness: 10 | Last Saved |
Hue: 24 | Last Saved |
Audio Volume: 32 | Default |
VCR Mode | Default |
NR ON | Default |
Aspect Ration 4:3 | Default |
Freeze OFF | Default |
Front Panel Unlocked | Last Saved |
10.[IN]
This command selects the input port on the unit to be used as the source.
Command Format: [INyCi]
y= Input (y = # from 0 to 3) 0 =
1 = Composite Video
2 = PC Bypass
3 = YPbPr Video
Ci = Unit ID (i = # from 0 to 99)
Example:
Send the command [IN0] to select the S- Video input.
11.[INR]
This command selects the input port on the unit to be used as the source and recalls the saved settings.
Command Format: [INyRCi]
y= Resolution (y = # from 0 to 3) 0 =
1 = Composite Video
2 = PC Bypass
3 = YPbPr Video
R= Recall image property settings Ci = Unit ID (i = # from 0 to 99)
10 |
