Altinex DAA0106-V0A2 manual Installing Your Distribution, Amplifier, Operation, Termination Switch

DISTRIBUTION AMPLIFIERS

INSTALLING YOUR DISTRIBUTION

AMPLIFIER 6

Step 1. Connect the power cord to the unit and plug it into the power outlet. The power indicator LED on the front panel will light. This indicates that the unit is operational.

Step 2. Connect the audio output of the source (computer, VCR, etc.) to the input of the DAA0106-V0A2using high quality cables. The LED on the front panel will turn green. This indicates an input signal on the input of the distribution amplifier.

Step 3. Connect the output channels of the amplifier to the display devices, such as monitors or projectors.

Step 4. Verify that the quality of the output signal on all speakers is good. If the quality of the output signal is less than perfect, make sure that high quality cables are used, and all connections are solid.

CONGRATULATIONS! YOU ARE DONE.

If you experience any problems, please call 1-800-258-4623 or 1-714-990-2300 for international calls.

OPERATION 7

The DAA0106-V0A2will operate successfully as long as cables are attached properly and other technical specifications are followed.

7.1 TERMINATION SWITCH

The termination switch of the audio amplifier may be set to 600 Ohms on the audio input if it is in the ON position, and high impedance in the OFF position.

6