Altinex MT108-102 manual Multi-Tasker, 14. G

MULTI-TASKER

14. [G]

This command is used to request group data. With the command, the user can identify which input or output of a particular group is on.

Command Format: [GkUi]

k	=	group number (k = # from 1-9)
i	=	unit number (i = # from 0-9)

Example:

If group 1 has DA Cards with outputs 1 and 2 on, while group 2 has SW Cards with input 2 on:

[G1]: will return feedback as ON12 G1U0.

[G2]: will return feedback as ON2 G2U0.

15. [RD]

This command displays the members in each group. Members can be any card in enclosure slots 1 to 19.

Command Format: [RDGkUi]

k = group number (k = # from 1-9) i = unit number (i = # from 0-9)

Example:

To read member data for group 1 of unit 1, send the [RD] command. The system will return feedback as C1C2C3 G5U1.

7.3 SUMMARY OF COMMANDS

1) [VER] Receives software version

2)[C] Receives status of the card

3) [CiS] Save card configuration

4)[SIGCi] Check for input signal

5)	[ON]	Turns on one or more outputs for
		a single card or a group of cards
6)	[OFF]	Turns off one or more outputs for
		a single card or a group of cards
7)	[…S]	Save the command configuration
8)	[…F]	Provides feedback upon sending
9)	[…P]	Sets the path, preload for [SW]
10)	[SW]	Switch, preloaded outputs
11)	[HELP]	Display available commands
12)	[WR]	Groups multiple cards

13)[CLR] Clears members of a single group or all groups

14)[G] Requests group data

15) [RD] Displays group members

10