Altinex manual 4 MT109-100 Menus, Menu Mode Examples, Select An Input, Set Input 3 Input Volume

MULTITASKER™

7.4.4 MT109-100 MENUS

Following are the menus available to the MT109-100. The first menu is the Main Menu only. The second listing is an expansion of all the menu items available.

The expanded menu contains values in parentheses that indicate the current setting or value of that parameter. In some areas, additional comments are provided for clarification.

System prompts requiring specific values for volume, card number etc. are not shown. See the examples following the menus for details.

CAUTION: Pay special attention to the top of the CONTROL menu. After selecting the CONTROL menu, THIS CARD or a group will be identified at the top of the sub-menu. Since group functions may be modified from this menu, make sure the desired card or group is selected.

MT109-100 Menus

1: CONTROL

SELECT CARD/GROUP

SAVE

CLEAR

SWITCH

VOLUME

MUTE

2: SETUP

SET GROUP

SET INPUT VOLUME

SET RAMP TIME

3:STATUS

4:HELP

400-0095-005 21

7.4.5 MENU MODE EXAMPLES

All Menu Mode examples assume an MT109-100is installed in slot 1. Start by clicking in the Terminal Window. Press ENTER and a list of available cards will be displayed.

1. Select An Input

Follow the keystrokes below to select Input 3 as the source input.

Enter List available cards

01Select MT109-100 in slot #1

1Select CONTROL Menu

1 Select Card/Group Select

0Select This Card (card #1) The CONTROL menu will read THIS CARD at the top.

ESC	Accept this selection
4	Select SWITCH sub-menu
3	Select Input 3
ESC	Return to CONTROL Menu
ESC	Return to the Main Menu

2.Set Input 3 Input Volume

Starting from the main menu, set Input 3 volume level to 16. Follow the keystrokes below.

2 Select SETUP Menu

2Select Set Input Volume

3Select Input 3 Volume

16Enter 16

NOTE The system may echo the 1 and the 6 entries depending on the software settings.

ESC	Return to SETUP
ESC	Return to the Main Menu

3.Set Output Volume

Starting from the Main Menu set the output volume level to 16 using the keystrokes below.

1Select CONTROL Menu

5Select VOLUME

1or 2 Use “1” to increase and “2” to decrease until the desired level is obtained.

ESC	Return to CONTROL menu
ESC	Return to the Main Menu

21