MULTITASKER
400-0433-00315
Example:
G5 consists of the C2, C4, and C6. Remove
only C4 and C6 from the group by sending the
command [RMC4C6G5]. The system will return
the following feedback:
[G5=C2]
24. [RMG]
This command may be used to delete an entire
group, or all groups.
REMOVE A GROUP
Remove all the members from the group,
effectively deleting the group.
Command Format: [RMGk]
Gk = Group ID (k = # from 1-8)
Example:
G5 consists of the C2, C4, and C6. Remove all
cards from the group by sending the command
[RMG5]. The system will return the following
feedback:
[G5=0]
REMOVE ALL GROUPS
Remove all the members from every group,
effectively deleting all groups.
Command Format: [RMG*]
Example:
G5 consists of C2, C4, and C6. G2 consists of
C1, C2, C3, C4, and C5. Delete all the groups
by sending the command [RMG*]. The system
will return the following feedback:
G1-G8: EMPTY
25. [RD]
This command reads and then displays the
members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from 1-8)
Example:
C2, C4, and C6 make up G5. Read the member
data for G5 by sending the command [RDG5].
The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that
make up G5. In this case, G5 includes C2, C4,
and C6.
7.3 SUMMARY OF COMMANDS
Card Commands
1) [VER] Display firmware version
2) [C] Display card status
3) [CnS] Save card settings
4) [?] Display system status
5) [?C] Display card status
6) [STA1] Enable auto feedback
7) [STA0] Disable auto feedback
8) [CLR] Reset card to defaults
9) [TEST] Test memory ICs
10) [EQ] Display/select equalization
11) [EQ=] Set equalization level
12) [GAIN] Display/select video gain
13) [GAIN=] Set video gain level
14) [HELP] Display available commands
15) [...S] Save command setting
16) [FBD] Enable/disable feedback delay
ID Commands
17) [RSI] Reset Card IDs
18) [SIDn] Set all Card IDs
19) [SIDnCi] Set one Card ID
20) [SID+n] Set Card ID offset
21) [RSN] Read Card slot number