Altinex MX2106AV manual Application Diagram, Switcher, DIAGRAM 1 TYPICAL CONFIGURATION

SWITCHER

APPLICATION DIAGRAM 5

DIAGRAM 1: TYPICAL CONFIGURATION

In addition to automatic switching, the MX2106AV may be controlled manually with an external switch, or using ASCII commands over the RS-232 bus.

If a remote switch is connected to the INPUT SELECT jack, INPUT 1 will be selected when the contact is open. INPUT 2 will be selected if the channel select contact is closed. If the RS-232 cable is connected, the user may send the command [ON1] to select input 1 or [ON2] to select input 2.

Auto-switching is disabled with either manual or RS-232 control. The switching will be identical whether there are one or two active signals. The indicator lights located next to the input ports indicate which input is selected.

5