Altinex manual About Your MX2426CV Switcher, Technical Specification

SWITCHERS

∙Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment.

ABOUT YOUR MX2426CV SWITCHER 2

Designed for courtroom applications, the MX2426CV Court PC View Trial Presentation Switcher handles the specific switching, distribution, and control needs of a typical trial presentation system. The MX2426CV Switcher offers two VGA (VGA/SVGA/XGA) inputs – each with buffered local monitor outputs – and six VGA main outputs to transmit signals to monitors and/or projectors throughout a courtroom. The inputs are typically used for displaying to each other’s team as well as to the various other participants in a trial including the Judge, the Witness, the Jury, and the Media.

The front panel of the MX2426CV allows a user to select which input will be displayed and which of the outputs will be turned ON or OFF. There are also four memory settings that can store configurations and recall them at the touch of a button. These features make the MX2426CV Switcher ideal for a courtroom environment in which evidence may need to be previewed before being displayed to the jury or to a witness. The MX2426CV may also be controlled through RS- 232, allowing it to be switched by a computer or other third-party control system.

An optional accessory, the Judge Override Button (part # RC5206CV), is currently usable with the RC5251IR. The Judge Override Button allows the Judge to immediately black-out all of the displays in the system to avoid displaying inadmissible evidence. The Monitor Status Display provides a manner of quickly determining which displays in a system are active, as the face of the displays may not always be visible.

The MX2426CV handles the requirements of a standard trial computer presentation system. For advanced systems, using the MX2426CV Switcher together with other Altinex products may expand its capabilities.

The MX2426CV offers an extremely low-profile design to reduce visual obstruction in the

courtroom when installed as a desktop unit. It may also be rack-mounted using optional hardware.

TECHNICAL SPECIFICATION			3
FEATURES/DESCRIPTION		MX2426CV
GENERAL
No. of Inputs		Two
Input Connector		15-pin HD Female
No. of Outputs		Two Local Monitor +
		Six Main Outputs
Local Monitor Output		15-pin HD Female
Connector
Main Output Connector		15-pin HD Female
Compatibility		VGA, SVGA, XGA,
		RGBHV, RGBS,
		RGsB, Component
	Video (Y, R-Y, B-Y), S-
		Video (Y/C) and
		Composite Video
Table 1. MX2426CV General
MECHANICAL		MX2426CV
Height (inches)		17.00in (432mm)
Width (inches)		1.75in (44mm)
Depth (inches)		9.00in (229mm)
Weight (pounds)		4.8lbs. (2.18kg)
Ship Weight (pounds)		7.0lbs. (3.18kg)
Material		0.1” Al
Finish		Gray
Front/Back Panels		Lexan
T° Operating		10°C-35°C
T° Maximum		50°C
Humidity		90% non-condensing
MTBF (calculations)		40,000hrs (min.)
Table 2. MX2426CV Mechanical
ELECTRICAL		MX2426CV
Input Video Signal
Analog Signal		-1.5V to +1.5V
		(+/-1.5V p-p max)
Impedance		75 Ohms
Input Sync Signal
Composite Sync		TTL(+/-)
Sync on Green		-0.3V
Impedance		10 k Ohms
Output Video Signals
Analog Signal		-1.5V to +1.5V
		(+/-1.5V p-p max)

3