SWITCHERS
|
|
|
|
|
|
| APPLICATION DIAGRAM | 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INSTALLATION | 6 |
Step 1. Make sure that the power input is set to the proper AC voltage for your country. An incorrect setting can result in unit damage not covered by warranty.
Step 2. Connect the power cord to the unit and plug it into the power outlet.
Step 3. Connect the cables from the video sources (computers) to the input channels, local monitors to the loop outputs and connect the output channels to the display devices (monitors or projectors. A Shielded, high, quality coaxial cable is recommended for video cable runs.
Step 4. Verify that the display and audio equipment operates properly and results in perfect images and sound.
CONGRATULATIONS! YOU ARE DONE.
If you experience any problems, please call
international calls.
OPERATION | 7 |
7.1 FRONT PANEL CONTROL
The front panel of the MX2426CV offers controls that are specifically designed for a courtroom environment. The SOURCE SELECT buttons allow a user to select between the presentation systems of the plaintiff or the defendant. The DISPLAY SELECT section of the switcher allows a user to turn ON or OFF, display devices connected to the respective ports. The RECALL/SAVE section of the control panel allows a user to store various presets in memory and recall them at the push of a button. To save a preset select the outputs to be controlled by one button and store the preset in any one of four memories by holding the memory button for 2 seconds. To recall just press the memory button.
7.2 MASTER DISABLE CONTROL
The MX2426CV is also equipped with a master disable control that allows disabling of the unit. This port is used to connect the Judge Override button. See the description below. The connection is accomplished by connecting one wire to the OFF pin and the other to the GND pin. When the OFF pin is shorted to ground, all video signals are terminated. INPUT SELECT SECTION
6
