flow center mounting

caution

The following instructions represent industry accepted installation practices for closed-loop earth coupled (ground loop) installations. Instructions are provided to assist the contractor in installing trouble free ground loops. These instructions are recommendations only. State/provincial and local codes MUST be followed and installation MUST conform to ALL applicable codes. It is the responsibility of the installing contractor to determine and comply with ALL applicable codes and regulations.

notice

The Flow Center must be mounted with the pump shaft in the horizontal position. In other words, it should always be mounted in a vertical position (not on its back or mounted to the ceiling). See Figure 3.

The pump should be located as close to the unit as possible to limit the length of rubber hose kit or interconnect piping and thus its associated pressure drop.

Stud wall

Mounting on stud wall with or without drywall can be accomplished by using two (2) lag bolts through the top and bottom center holes directly into the stud. See Figure 4A.

concrete/masonry wall

Mounting onto a concrete wall can be accomplished typically using four (4) 1/4" diameter tapcon cement screws in the four (4) outer corner mounting holes. See Figure 4B.

Side of unit

Mounting on the side of the unit is possible, but not necessarily recommended because it can inhibit serviceability and also lead to vibration of the sheet metal casing. It could also lead to puncturing an internal refrigerant or water pipe. If necessary, however, the flow center can be mounted to the sheet metal casing utilizing four (4) self-drilling screws. (Pay close attention not to puncture internal components.)

Manual

2100-518B

Page

7 of 30

Page 7
Image 7
AMABILIA DORFC-1, DORFC-2 installation instructions Flow center mounting, Stud wall, Concrete/masonry wall, Side of unit

DORFC-1, DORFC-2 specifications

AMABILIA DORFC-2 and DORFC-1 are two innovative technologies designed to enhance connectivity and improve communication systems. These frameworks are particularly useful in environments where traditional network infrastructure may be lacking or impractical. Both models come equipped with several key features that distinguish them from their predecessors and competitors in the field.

One of the main features of AMABILIA DORFC-2 is its advanced adaptive signal processing capability. This allows the system to intelligently adjust to varying signal conditions, minimizing data loss and ensuring a more stable connection. The technology incorporates machine learning algorithms to learn from network behavior and optimize performance, making it ideal for dynamic environments.

The DORFC-1 model complements the DORFC-2 by offering unique characteristics aimed at enhancing user experience. It supports a wider range of frequency bands, allowing for improved coverage and penetration in densely populated areas. Additionally, DORFC-1 is built with enhanced security protocols to protect data integrity and user privacy. This includes end-to-end encryption and robust authentication mechanisms that safeguard the network from unauthorized access.

In terms of deployment, both AMABILIA DORFC-2 and DORFC-1 are designed for ease of installation. They can be integrated into existing systems with minimal disruption, enabling organizations to upgrade their network capabilities without extensive downtime. This adaptability makes them suitable for various industries, including telecommunications, logistics, and emergency services.

The technologies incorporate state-of-the-art modulation techniques to maximize data throughput. This results in lower latency and higher reliability, which are critical for applications requiring real-time data transmission. Whether used for voice, video, or IoT applications, these systems are tailored to meet the demands of modern communication needs.

Energy efficiency is another noteworthy aspect of the AMABILIA DORFC series. Both models are optimized for low power consumption, which not only reduces operational costs but also has a positive impact on environmental sustainability. This technology aligns with global efforts to reduce the carbon footprint of communication infrastructure.

In summary, AMABILIA DORFC-2 and DORFC-1 represent significant advancements in connectivity technology. With their adaptive processing capabilities, enhanced frequency support, robust security features, and energy efficiency, they stand out as reliable solutions for improving communication networks in diverse applications.