Operation
Vent Control
Open or close the vent by sliding the vent control lever to the appropriate setting.
EXHAUST - This setting opens the vent to move indoor air out.
Note: To conserve energy, the unit should be set to the FAN ONLY mode when using this setting.
CLOSED - In this position the vent is closed and room air is recirculated and filtered. This position should be used for all normal cooling operations (see underlined cooling options on control panel).
Unit Control
ENERGY SAVER mode provides the most (HIGH, MED and LOW) -
energy efficient use of your room air condi- tioner. In ENERGYSAVERmode, thefanstopswhenthe compressor stops cooling. This feature can be used with SMART COOL or cooling with any fan speed.
Amana's new air sampling system works to maintain set temperature within 1.5°F while in ENERGY SAVER mode. Approximately every 5 minutes the fan will turn on and "sample" the room air to determine if cooling is needed. Ifthe room is cool enough, the fan will cycle off. If the room needs further cooling, the corn pressor will start along with the fan until the set temperature is reached.
ENERGY SAVER has a soft start fan feature. This feature starts the fan in low speed to reduce noise.
theFANsetONLYfan speed- FANwithoutONLY circulatescooling. Thisroomfeatureair at can be turned off by pressing the FAN ONLY, the SMART COOL, or the ENERGY SAVER button. Indoor
temperature is displayed in FAN ONLY mode.
Control Panel
[_ OFF - Completely shuts off the unit.
SMART COOL- SMART COOL adjusts the
temperaturefan speed of. theTheunitSMARTto achieveCOOL thefeatureselecteduses computer logic to cool the room quickly and
quietly. The fan speed starts on high, automatically switches to medium, and finally goes to low as the room temperature nears the set temperature.
__ | - These three buttons are used to |
LOW FAN, MED FAN, HIGH FAN | |
| select either a low, medium or high |
fan speed to cool. If FAN ONLY is selected these buttons change fan speed without cooling. Selecting the fan speed starts normal cooling.
creaseSET Temperatureor decrease the- Thesesettemperaturekeypads.in-
of delaying the start up or shut down of the air DELAY TIMER- This button provides a means
conditioner from 1 to 24 hours from the present time. After setting the delay timer, the displayed time will countdown to unit start or stop, See next page for details,
[_ __sriogmhetnme:dAsdlU_stiFp/atybeght.
ness can be changed using the "up" or "down" keypad. To decrease brightness, simultaneously press and hold OFF pad with "down" arrow. To increase brightness, simulta- neously press and hold OFF pad with "up" arrow.
