Installation

Your refrigerator was packed carefully for shipment. Remove and discard shelf packaging and tape. Do not remove the serial plate.

Location

•Do not install refrigerator near oven, radiator or other heat source. If not possible, shield refrigerator with cabinet material (contact a qualified contractor).

•Do not install where temperature falls below 55° F (12° C) or rises above 110° F (43° C). Malfunction may occur at this temperature.

•Refrigerator is designed for indoor household application only.

Measuring the Opening

When installing your refrigerator, measure carefully. Allow 1⁄2” space at top and 1⁄2” space behind the machine compartment cover (located in the rear) for proper air circulation.

Subflooring or floor coverings (i.e. carpet, tile, wood floors, rugs) may make your opening smaller than anticipated.

Some clearance may be gained by using the leveling procedure under Leveling.

Important: If refrigerator is to be installed into a recess where the top of the refrigerator is completely covered, use distance from floor to top of hinge cap to verify proper clearance.

Transporting Your Refrigerator

•NEVER transport refrigerator on its side. If an upright position is not possible, lay refrigerator on its back. Allow refrigerator to sit upright for approximately 30 minutes before plugging it in to assure oil returns to the compressor. Plugging the refrigerator in immediately may cause damage to internal parts.

•Use an appliance dolly when moving refrigerator. ALWAYS truck refrigerator from its side or back–NEVERfrom its front.

•Protect outside finish of refrigerator during transport by wrapping cabinet in blankets or inserting padding between the refrigerator and dolly.

•Secure refrigerator to dolly firmly with straps or bungee cords. Thread straps through handles when possible. Do not over-tighten. Over-tightening restraints may dent or damage outside finish.

3

Leveling

To enhance the appearance and maintain performance, the refrigerator should be leveled per instructions below.

CAUTION

To protect property and refrigerator from damage, observe the following:

•Protect vinyl or other flooring with cardboard, rugs, or other protective material.

•Do not use power tools when performing leveling procedure.

Notes:

•Complete any required water supply connection before leveling.

•Some models only have adjustment screws (A).

Materials Needed:

•3⁄8” hex head driver

•Carpenter’s level.

1. Remove toe grille.

• Grasp firmly and pull outward to unclip.

2.Using hex head driver, turn

the front adjustment screws (A) on each side to raise or lower the front of the refrigerator (see illustration below).

A BB A

CC

3.Using the hex head driver, turn each of these adjustment screws (B) to raise or lower the rear of the refrigerator.

4.Using a carpenter’s level, make sure front of refrigerator is 1⁄4” (6 mm) or 1⁄2 bubble higher than back of refrigerator and that the refrigerator is level from side to side.

5.Turn stabilizing legs (C) clockwise until firmly against floor.

6.Turn adjustment screws (A) counterclockwise to allow the full weight of the refrigerator to rest on the stabilizing legs.

7.Replace the toe grille.

•Align the toe grille mounting clips with the lower cabinet slots.

•Push the toe grille firmly until it snaps into place.

Page 3 Page 5
Page 4
Image 4
Amana ABD2533DEB, ABD2533DEW Installation, Location, Measuring the Opening, Transporting Your Refrigerator, Leveling
Page 3 Page 5

ABD2533DEW, ABD2533DEB specifications

The Amana ABD2533DEB and ABD2533DEW are stand-out models in the realm of refrigerator design, combining practicality with modern aesthetics. These refrigerators are especially well-suited for households that prioritize efficiency and convenience in their kitchen appliances.

One of the main features of the Amana ABD2533 models is their generous storage capacity. With a total refrigerator volume that allows for ample room for groceries, fresh produce, and larger items, the ABD2533 series ensures that users can organize and access their food easily. The adjustable shelves provide flexibility, enabling users to customize the interior layout based on their individual needs.

Energy efficiency is a hallmark of the Amana ABD2533DEB and ABD2533DEW models. They come equipped with Energy Star certification, signifying their capability to reduce electricity consumption without sacrificing performance. This feature not only helps in minimizing the household carbon footprint but also results in cost savings on utility bills over time.

Both models emphasize advanced cooling technologies. The refrigerator compartment is designed with a cooling system that evenly distributes cold air throughout, ensuring that all items maintain the optimal temperature. This feature helps to prolong the freshness of perishable items, making it an ideal choice for busy families.

Another notable characteristic of the Amana ABD2533 series is their dual cooling system. The separate cooling systems for the refrigerator and freezer compartments work in harmony to prevent the mingling of odors and maintain the quality of food. This ensures that users experience fresher food and better preservation.

The aesthetic qualities of these models are equally impressive. The sleek stainless steel finish of both the ABD2533DEB (Black) and ABD2533DEW (White) variants not only enhances the kitchen's visual appeal but also provides a durable surface that is easy to clean. The refrigerators are designed to blend seamlessly with any kitchen décor, making them a stylish addition to any home.

Additional features include humidity-controlled crisper drawers, which provide the perfect environment for fruits and vegetables, and an ice maker that supplies fresh ice at any time. These aspects enhance the overall usability of the refrigerator, making day-to-day life more convenient.

In conclusion, the Amana ABD2533DEB and ABD2533DEW models represent an amalgamation of style, efficiency, and practicality, catering to modern households’ needs. Whether it's the robust storage options, advanced cooling technologies, or energy-saving features, these refrigerators are designed to provide reliability and satisfaction for years to come.
Top Page Image Contents