12
Using the Oven Control

Setting Electronic Clock

The 12 hour clock does not display AM, PM or military time. When power
is connected or restored, display flashes until
RECALL OVEN TEMP/CLOCK pad is pressed or
temperature knob is turned.
1. Press RECALL OVEN TEMP/CLOCK pad.
2. Press
+ or pads until correct time-of-day
displays.
3. Time is locked in after 5 seconds of no adjustment.

Setting Minute Timer

The timer is a timer only. Electronic timer does not control bake, broil or
self-clean function. Timer can be set up to 11 hours and 59 minutes.
1. Press TIMER ON/OFF pad.
2. Press + or pad until desired amount of time displays.
• Time increases in 1 minute and 10 minute
increments.
• Timer begins counting down automatically
after time is entered.
• To view clock while timer counts down,
press RECALL OVEN TEMP/CLOCK pad.
Timer will return after 3 seconds of no
input.
3. Press and hold TIMER ON/OFF pad to cancel timer signal.
• After time elapses, timer beeps a single, three second tone.
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER ON/OFF pad, then + or pad until new time displays.
To cancel timer when remaining time is displayed or when signal is
beeping, press and hold TIMER ON/OFF pad.

Flashing Display

When power is connected
or interrupted, oven display flashes.
Press CLOCK to reset display.
Clock may need to be reset.

Making the Numbers

Increase at a Faster Rate

Time increases in larger increments
the longer the + or pad is held.

Timer Signal

When time elapses, beep will sound.
Press TIMER ON/OFF pad to stop timer
and return to clock display.