Amana AFI2538AEW User Preferences, Warm Cabinet Surfaces, Using the Controls

Using the Controls

To Activate Continuous Light:

Press Light pad again. The On indicator light will illuminate.

To Deactivate Auto or Continuous Light:

Press the Light pad a third time. This will turn off the dispenser and indicator light.

Door Alarm

The Door Alarm feature will alert you when one of the doors has been left open for approximately three minutes. When this happens, the Door Alarm light will flash and an audible alarm will sound.

To Activate:

Press the Door Alarm pad once. The Door Alarm indicator light will illuminate.

To Deactivate:

Press the Door Alarm pad once. The indicator light will go off.

To Turn Off the Audible Alarm:

Press the Door Alarm pad once or close the door.

Max Cool

The Max Cool feature is automatically activated and the indicator light illuminates.

This feature provides the ability to cool down the refrigerator and freezer after extended door openings or when loading either compartment with warm food. This feature causes the refrigerator and freezer temperatures to drop to the minimum seetings on the control. Important: When the Max Cool feature is in

operation, the and pads for the Refrigerator

and Freezer controls will not operate.

To Activate:

Press the Max Cool pad once. The Max Cool indicator light will illuminate.

To Deactivate:

Press the Max Cool pad once. The indicator light will go off.

Max Cool will deactivate automatically after 2 hours.

User Preferences

Access the User Preferences menu to:

•Change the temperature display from °F to °C.

•Enable or disable audible alarms.

•Adjust the light level at which the Dispenser Auto Light will illuminate when this feature is activated on the ice and water dispenser.

• Activate the Sabbath Mode.

To access the User Preferences menu, press and hold the Door Alarm pad for three seconds. When in the User Preferences mode, a short title for the feature will appear in the Freezer temperature display and the feature status will appear in the Refrigerator display.

1.Use the Freezer and control to scroll through the features.

2.When the desired feature is displayed, use the

Refrigerator	and	control to change the
status.

3.When changes are complete, press the Door Alarm pad for three seconds OR close the Refrigerator door.

Temperature Display (F_C)

Change the display to show temperatures in degrees Fahrenheit or degrees Celsius.

Alarm (AL)

When the Alarm mode is off, all audible alarms will be disabled until the feature is turned on.

Auto Light Level Selection (LL)

This setting adjusts the light level at which the dispenser light will illuminate when the sensor detects that the light levels in the room are low. Setting 1 is the darkest light level setting, setting 9 is the brightest light level setting. Important: The Auto Light must be activated on the ice and water dispenser control to take advantage of this option.

Sabbath Mode (SAb)

When the Sabbath Mode is on, all control lights, interior lights, and the night light will be disabled until the feature is turned off. Press the Door Alarm pad for three seconds to restore the lights.

Notes:

•Dispenser light will not activate during dispensing while in Sabbath Mode.

•If the power fails, the control will remain in Sabbath Mode when power returns.

Warm Cabinet Surfaces

At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when the refrigerator is first started, during hot weather and after excessive or lengthy door openings.

11