MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, a “:” will blink in the display. Touch OFF/CANCEL to stop the blinking. If the “:” blinks in the display at any other time, a power failure has occurred. Touch OFF/CANCEL and reset the clock if needed.
If “RETRY” blinks in the display for 1 second, an invalid value has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use, the display shows the time of day.
Scroll speed may be adjusted, and the language may be changed. See “Options” section.
Start/Enter
The START/ENTER control will start any function.
If
The START/ENTER control shares function with the JET START control.
JetStartFeature
The JET START control (START/ENTER pad) automatically starts the microwave oven at 100% power for 30 seconds, and adds 30 seconds of cook time, up to 3 minutes, then 1 minute of cook time, up to 10 minutes with each additional touch of the control.
Time may be added in
Off/Cancel
The OFF/CANCEL pad clears any incorrect command and cancels any program during cooking. It will not erase the time of day.
The microwave oven will also turn off when the door is opened. Close the door and touch START/ENTER to resume the cycle. A sensor cooking cycle may not be resumed if interrupted by opening the door.
The OFF/CANCEL control shares function with the Control Lock.
ControlLock
The Control Lock shuts down the control panel pads to avoid unintended use of the microwave oven.
To Lock/Unlock Control: Before locking, make sure the microwave oven and Timer are off. Touch and hold OFF/CANCEL for 4 seconds until 1 tone sounds and “LOCKED” appears in the display. Repeat to unlock. “UNLOCK” will appear in the display and 2 tones will sound.
7
