English
Operation Control Panel
Power Control | Note: unit does not need to de vented in Fan | |
The power control turns the unit on and off. | mode. | |
Warning Light |
| |
Condensed water may accumulate in the unit. If | Fan Speed Control | |
the internal tank becomes full, the Warring Light | ||
|
will shine and the unit will not operate until the unit has been drained.
Mode Control
The Mode Control has three settings:
Cool Dehumidify Fan
The settings are adjusted with Mode Control but- ton. A light will indicate which setting is currently being used.
Cool Mode
When cool mode is selected, the indicator light will shine green. During the cooling mode the air is cooled and hod air is exhausted to the outside air through the exhaust tube. Adjust fan speed air through the temperature to suit your desired com- fort level.
Note: The air exchange hoses must vent outside the room when using cool Mode.
Dehumidify Mode
When Dehumidify mode is selected, the indicator light will shine orange. Air is dehumidified as it passes through the unit, without being in full cooling mode . The fan will operate in Medium speed. Fan speed is not adjustable in Dehumidify mode.
Fan Mode
When Fan mode is selected the indicator light will shine yellow. Air is circulated throughout the room with no cooling.
(6)
The Fan Speed Control has 3 settings:
High | Medium | Low |
Timer Control
Auto turn off : With machine in fan mode, press timer button to select number of hours you would like the unit to run in air conditioning mode until it automatically shuts off.
Auto turn on : With machine powered off , press timer button to select number of hours until you would like the unit to automatically start running in air conditioning mode
Timer / Timer set Controls
Used for adjusting the timer and thermostat. The default display is room temperature. In cooling mode, When " 
" or " " button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in Cool and Heat mode. The time is adjustable between 1 and 12 hours.
Note: By pressing both Temp/Timer Set buttons at the same time, the display will toggle between Celsius and Fahrenheit.
