Oven Door
For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1.Open the oven door. Insert the hinge locks into both hinge hangers. See following illustration. Do not unlock hinges while the door is removed from the range.
A
A. Hinge lock
2.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
3.Tilt top of door toward range. Insert bottom door hinge notch down onto front frame edge.
4.Open the door completely and unlock the hinges.
A
A. Hinge lock
5.Close the door slowly to assure door side panel clearance and proper hinge engagement.
Removing the Oven Bottom
The oven bottom can be removed for standard cleaning of the oven.
Before cleaning, make sure the oven is completely cool.
3.Pull door straight up, then toward you. Do not unlock the hinges until the door is replaced on the range.
To Replace:
1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
2.Hold oven door so that the top edge of each door slot is horizontal. Insert door hinge into the hinge slots.
To Remove:
1.Remove the oven racks.
2.Place fingers in the slots in the bottom panel.
A
A.Lip
3.Lift the rear of the panel up and back.
The lip at the front of the panel should clear the front frame of the oven cavity.
4.Lift the bottom up and out.
To Replace:
Reverse the previous steps
12
