Oven burner flames are uneven, yellow and/or noisy
■Is propane gas being used?
The appliance may have been converted improperly. Contact a trained repair specialist.
■Is the air/gas mixture correct?
Contact a designated service technician to check the air/gas mixture or see the Installation Instructions.
Oven temperature too high or too low
■Does the oven temperature calibration need adjustment? See the “Oven Temperature Control” section.
■Is the proper bakeware being used? See the “Bakeware” section.
■Are the racks positioned properly?
See the “Positioning Racks and Bakeware” section.
■Is there proper air circulation around bakeware? See the “Positioning Racks and Bakeware” section.
■Is the batter evenly distributed in the pan? Make sure batter is level in the pan.
■Are baked items too brown on the bottom? Decrease oven temperature 10° F to 30°F (5°C to 15°C).
■Are crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.
Display shows messages
■Is the display showing a flashing time?
There has been a power failure. Press OFF/CANCEL or CANCEL/OFF to clear the display. Reset the clock, if needed. See the “Clock” section.
■Is the display showing “F” followed by a number?
Press OFF/CANCEL or CANCEL/OFF to clear the display. If an “F” code appears again, contact a trained repair specialist.
Cooktop cooking results not what expected
■Is the proper cookware being used? See the “Cookware” section.
■Is the control knob set to the proper heat level? See the “Cooktop Controls” section.
Slow baking or roasting
■Was the oven preheated?
Wait for oven to preheat before placing food in oven.
■Is there proper air circulation around bakeware? See the “Positioning Racks and Bakeware” section.
■Does the oven temperature calibration need adjustment? See the “Oven Temperature Control” section.
■Is the proper length of time being used? Increase baking or roasting time.
■Is the proper temperature set? Increase temperature by 25°F (15°C).
■Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer cooking times.
Baking results not what expected
■Is the range level?
Level the range. See the Installation Instructions.
■Does the oven temperature calibration need adjustment? See the “Oven Temperature Control” section.
■Was the oven preheated?
Wait for oven to preheat before placing food in oven.
■Is the proper oven temperature calibration set? See the “Oven Temperature Control” section.
Broiler burner fails to light
■Is the ignition system broken?
Contact a designated service technician to replace it.
■Has a household fuse been blown, or has a circuit breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.
14
