New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

Kink in the home water source line? Straighten the water source line.

New installation? Flush and fill the water system.

Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements” in either the Installation Instructions or the Use & Care Guide.

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

New installation? Allow 24 hours after installation for the water supply to cool completely.

Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order replacement filters, call 1-800-442-9991and ask for the appropriate part number listed below or contact your authorized Amana dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Filter:

Order Part #4396841 (T2RFWG2)

In Canada, Order Part #4396841B (T2RFWG2)

WATER FILTER CERTIFICATIONS

11

Page 11
Image 11
Amana T2RFWG2, T1WG2L Accessories, Water dispenser will not operate properly, Water is leaking from the dispenser

T2RFWG2, T1WG2L specifications

The Amana T1WG2L and T2RFWG2 are part of Amana's line of high-efficiency washing machines and dryers, designed to meet the needs of modern households while delivering exceptional performance and convenience. With a suite of advanced features, these appliances are built to make laundry chores simpler and more efficient.

Starting with the Amana T1WG2L washer, this front-loading machine is engineered with a robust set of features tailored to enhance the washing experience. One of its standout characteristics is its high-efficiency design that reduces water and energy consumption, resulting in lower utility bills. The washer is equipped with a variety of wash cycles and options, including delicate, heavy-duty, and quick wash settings, allowing users to customize each load based on fabric type and soil level.

The T1WG2L also incorporates a stainless steel drum, which is designed for durability and performance. This material resists chipping and is less likely to retain odors. Combined with the unit's efficient suspension system, it ensures that clothes come out clean while minimizing wear and tear. Additionally, the washer features an advanced load sensing technology that adjusts water levels according to the size of the load, further enhancing efficiency.

Moving on to the Amana T2RFWG2 dryer, it perfectly complements the T1WG2L with its smart drying capabilities. The dryer is equipped with multiple drying cycles to cater to various fabric types such as towels, delicates, and heavy items. One of the key features is the moisture sensing technology, which intelligently detects moisture levels in the drum and automatically adjusts drying time to prevent over-drying. This not only saves energy but also helps to keep clothes looking their best.

Another significant feature of the T2RFWG2 is its wrinkle-prevent option, which tumbles clothes intermittently after the drying cycle is finished, helping to reduce wrinkles and ironing time. The dryer is also designed with a large capacity, allowing users to dry larger loads at once, making laundry days less tedious.

Both the T1WG2L and T2RFWG2 are designed with user-friendly controls, making them easy to operate even for those unfamiliar with modern washing and drying technology. Their sleek design ensures they fit seamlessly into any laundry room, while their advanced features promote efficiency and convenience.

In summary, the Amana T1WG2L and T2RFWG2 washing machine and dryer combination showcases advanced technology and thoughtful design, making them reliable companions for laundry day. With their focus on efficiency, durability, and ease of use, these appliances are a smart investment for any household looking to simplify its laundry process.