REFRIGERATOR FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. See the “Assistance or Service” section if you are interested in purchasing one of the accessories.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small,
3.Replace the meat drawer cover by fitting the notches and clips on the cover over the rear and center crossbars on the shelf.
4.Lower cover into place and pull the cover forward to secure the rear clips onto the shelf.
5.Replace the meat drawer.
NOTE: In some models the meat pan moves sideways on the shelf to allow for flexible positioning.
Refrigerator Shelves
(Glassshelvesonsomemodels)
The shelves in your refrigerator are adjustable to match your individual storage needs.
Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy.
Shelves and Glass Shelves (on some models)
To Remove and Replace a Shelf:
1.Remove items from the shelf.
2.Slide the shelf straight out to the stop.
3.Depending on your model, lift back or front of the shelf past the stop. Slide shelf out the rest of the way.
4.Replace the shelf by sliding the back of the shelf into the track in the wall of the cabinet.
5.Guide the front of the shelf into the shelf track. Be sure to slide the shelf in all the way.
Meat Drawer
(on somemodels)
To Remove and Replace the Meat Drawer:
1.Slide meat drawer out to the stop.
2.Lift front of meat drawer with one hand while supporting bottom of drawer with other hand. Slide drawer out the rest of the way.
3.Replace the drawer by sliding it back in fully past the drawer stop.
Meat Drawer Cover (on some models)
To Remove and Replace the Meat Drawer Cover:
1.Remove the meat drawer.
2.Push the cover back to release the rear clips from the shelf. Tilt the cover up at the front, and pull it forward.
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
Fresh fish or shellfish | use same day as purchased | |
Chicken, ground beef, variety meats (liver) | ...................... | |
Cold cuts, steaks/roasts | ||
Cured meats | ||
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.
Crisper
(on somemodels)
Crisper Drawers
To Remove and Replace a Drawer:
1.Slide crisper(s) straight out to the stop. Lift the front and slide the crisper(s) out the rest of the way.
2.Replace the crisper(s) by sliding the crisper(s) in fully past the stop.
Style 1
To Remove and Replace the Plastic Cover:
1.Remove the crisper(s).
2.Lift the front of the cover to remove the cover support. Then lift the cover up and slide it out.
12
