Reverse Doors (optional)
IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”
Style 1 - Standard
Graphics follow these instructions.
Door Stop Screw | Door Hinge Hole Plug |
Door Handle Sealing Screw | Cabinet Hinge Hole Plug |
Door Handle Screw Cover |
Style 2 - Contoured
Graphics follow these instructions.
Door Handle | |
Handle Screw | Screw Hole Plug |
Cabinet
1.Remove ⁵⁄₁₆"
2.Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown. See Graphic
Doors
1.Remove door hinge hole plug from top of freezer door. Move to opposite side as shown. See Graphic 2.
2.Remove door stop from both the freezer and refrigerator doors and move to the other side. See Graphic 3.
Door Handle Seal Screw Front |
Cabinet
1.Remove ⁵⁄₁₆"
2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown. See Graphic
Freezer door
1.Remove freezer handle assembly as shown. Keep all parts together. See Graphic 2.
2.Remove door hinge hole plug. Move to opposite side as shown. See Graphic 3.
3.Remove door handle sealing screws. Move to opposite side of freezer door as shown. See Graphic 4.
4.Remove door stop. Move to opposite side of freezer door as shown. See Graphic 5.
5.Position freezer handle on opposite side of freezer door. Assemble handle on door as shown. See Graphic 2.
6.Tighten all screws. Set aside door until hinges and refrigerator compartment door are in place.
Refrigerator door
1.Remove the screw cover. See Graphic 6.
2.Remove refrigerator handle assembly as shown. Keep all parts together. See Graphic 6.
3.Remove door hinge hole plug from refrigerator door. Move to opposite side hinge hole as shown. See Graphic 3.
4.Remove door handle sealing screws. Move to opposite side of refrigerator door as shown. See Graphic 4.
5.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown. See Graphic 7.
6.Remove door stop. Move to opposite side of refrigerator door as shown. See Graphic 5.
7.Position refrigerator handle on opposite side of the refrigerator door as shown. See Graphic 6. Drive top two screws in handle first. Align lower portion of handle and drive bottom screw.
8.Replace screw cover. See Graphic 6.
9.Tighten all screws. Set aside refrigerator door until bottom hinge is installed on refrigerator.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.
2.Assemble the parts for the center hinge as shown and tighten all screws. See Center Hinge graphic. Replace the freezer door.
3.Assemble the parts for the top hinge as shown. See Top Hinge graphic. Do not tighten screws completely.
4.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.
Final Steps
1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge graphic.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
2.Plug into a grounded 3 prong outlet.
3.Reset the controls. See “Using the Controls.”
4.Return all removable door parts to doors and food to refrigerator.
7
