Amana W10175445A How to Install and Remove Handles continued, How to Replace the Doors and Hinges

Installing Your Refrigerator

How to Install and Remove Handles continued

Installing Fresh Food Side-Mounted Handles If installing handles for the first time, the fresh food handles can be located on the back of the refrigerator.

Removing Fresh Food Side-Mounted Handles Removing handles may be necessary when transporting unit through tight spaces, or when reversing the door.

Install handle by fastening with T-15 Torx®* screws removed from edge of door.

NOTE: If reversing door, remove door plugs from opposite side of door and insert in screw holes.

Remove handle by removing three T-15 Torx®* screws from side of door.

•Retain screws for later replacement.

Installing Freezer Handles

If installing handles for the first time, the freezer handles can be located on the back of the refrigerator.

Removing Freezer Handles

Removing handles may be necessary when transporting unit through tight spaces.

Install handle by fastening with T-15 Torx®* screws removed from edge of door.

*Torx® is a registered trademark of Textron Inc.

Remove handle by removing three T-15 Torx®* screws from handle.

•Retain screws for later replacement.

Installing and Removing Stainless Steel Front -Mounted Handles

!WARNING

To avoid risk of serious personal injury from sharp edges, do not remove front-mounted stainless steel handles from unit.

How to Replace the Doors and Hinges

1Install hinge assemblies.

•Install top hinge loosely with 5/16" hex head screws.

•Install center hinge with Phillips screws.

•Install bottom hinge with 3/8" hex head screws.

2 Insert bottom hinge pin (some models).

• Locate bottom hinge hole closest to outside edge of cabinet, and insert bottom hinge pin. Replace any door shims, if present.

3Place hinge side of freezer door on bottom hinge pin and

hold freezer door upright while installing center hinge pin with 5/16" hex head driver.

•Replace any applicable door shims.

•Make sure the hinge pin is installed tight.

4Place hinge side of refrigerator door on center hinge pin.

5 While holding refrigerator door upright, tighten down top hinge with 5/16" hex head driver and replace hinge cover.

6