Amana W10562495A, W10572490A - SP manual Cycle Guide Automatic Cycles, Cycle Guide Manual Cycles

CYCLE GUIDE — AUTOMATIC CYCLES

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Use Automatic Cycles for better fabric care and energy savings

The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Use the NORMAL dryness level to provide optimal energy savings.

Items to dry:	Cycle:	Drying	Dryness	Default	Cycle Details:
		Temperature:	Level:	Time:
Heavyweight items	Heavy	High	More	45	Offers stepped drying starting with High heat
such as towels or	Duty		Normal		followed by Medium heat for enhanced fabric care
heavy work clothes			Less		and energy savings.
Work clothes, casual	Normal	Medium	More	38	Uses Medium heat to dry large loads of mixed
wear, mixed cottons,			Normal		fabrics and items. Normal is the preferred energy
sheets, corduroys			Less		cycle.
Undergarments,	Delicates	Low	More	28	Uses Low heat to gently dry delicate items.
blouses, lingerie,			Normal
performance wear			Less

CYCLE GUIDE — MANUAL CYCLES

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

	Cycle:	Drying	Default
Items to dry:		Temperature:	Time:	Cycle Details:
Small loads and	Quick Dry	High	13	For small loads of 3–4 items.
sportswear		Medium
		Low
		Air Only
Any load	Time Dry	High	(the last	Use to dry items to a damp level for items that do not require an
NOTE: Select Air		Medium	Time Dry	entire drying cycle. Select a drying temperature based on the type
Only to dry foam,		Low	time set)	of fabrics in your load. If you are unsure of the temperature to select
rubber, plastic, or		Air Only		for a load, select the lower setting rather than the higher setting.
heat-sensitive
fabrics.

Load Size Recommendations

For best results, follow the wet load size recommendations noted for each cycle.

Small load: Fill the dryer drum with 3–4 items, not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full. Do not pack tightly. Items need to tumble freely.

7