Troubleshooting

First try the solutions suggested here or visit our website at www.amana.com/help for assistance

and to possibly avoid a service call.

If you experience

Possible Causes

Solution

Dryer Results (cont.)

Clothes are not drying	The load is too large and heavy	Separate the load to tumble freely.
satisfactorily or drying	to dry quickly.	Reduce load size to recommended load size in “Cycle Guide.”
times are too long (cont.)		Reduce load size to recommended load size in “Cycle Guide.”
times are too long (cont.)
	Fabric softener sheets are blocking	The air outlet grille is just inside the door, behind the lint screen.
	the grille.	Check that it is not blocked by a fabric softener sheet.
		Use only one fabric softener sheet, and use it only once.

	The dryer is located in a room with	Proper operation of dryer cycles requires temperatures above
	temperature below 45ºF (7ºC).	45ºF (7ºC).

	The dryer is located in a closet.	Closet doors must have ventilation openings at the top
		and bottom of the door. The front of the dryer requires
		a minimum of 1" (25 mm) of airspace, and, for most
		installations, the rear of the dryer requires 5" (127 mm).
		See the Installation Instructions.

Cycle time is too short	The load may not be contacting the	Level the dryer. See the Installation Instructions. All four dryer
	sensor strips on Automatic Cycles.	feet should be in firm contact with the floor.

	The automatic cycle is ending	Change the dryness level setting on Automatic Cycles.
	early.	Increasing or decreasing the dryness level will change the
		amount of drying time in a cycle. If loads are consistently
		ending too early, see also “Changing the Automatic Cycle
		settings to increase or decrease drying time.”

Lint on load	Lint screen is clogged with lint.	Clean lint screen before each load.

Stains on load	Improper use of fabric softener.	Add dryer fabric softener sheets at the beginning of the cycle.
		Fabric softener sheets added to a partially dried load can
		stain your garments.

Stains on drum	Loose dyes in clothes.	Drum stains are caused by dyes in clothing (usually blue
		jeans). These will not transfer to other clothing.

Loads are wrinkled	The load was not removed from	Remove load promptly from dryer at the end of the cycle.
	dryer at the end of the cycle.	NOTE: Refer to garment care label instructions. Dry-clean-only

		garments are not recommended.

	The dryer was tightly packed.	Dry smaller loads that can tumble freely. Results may also
		vary depending on fabric type.

W10562495A, W10572490A - SP specifications

The Amana W10572490A and W10562495A are highly regarded appliance components designed for modern kitchens, offering exceptional features, technologies, and characteristics that enhance functionality and efficiency. These parts are primarily known for their reliable performance and compatibility with a wide range of Amana appliances.

One key feature of the Amana W10572490A is its design, which ensures seamless integration into various refrigerator models. This part serves as a crucial component in maintaining optimal cooling and preserving food freshness. The W10562495A complements this functionality, often associated with temperature regulation and internal airflow management, ensuring that the refrigerator operates efficiently.

Both parts are engineered with durability in mind. Constructed from high-quality materials, they can withstand the rigors of daily use, reducing the likelihood of wear and tear. This durability not only extends the lifespan of the appliance but also minimizes maintenance costs over time, making them cost-efficient choices for homeowners.

In terms of technology, the W10572490A boasts innovative features that contribute to energy efficiency. It helps in reducing energy consumption, which not only benefits the environment but also lowers utility bills. The W10562495A may include advanced sensing technology that allows for precise temperature adjustments, providing users with better control over their refrigeration needs.

Another characteristic worth noting is the user-friendly nature of these components. Both the W10572490A and W10562495A are designed for easy installation and replacement, allowing homeowners to manage minor repairs without the need for professional assistance. This accessibility empowers users to take charge of their appliance maintenance, ultimately leading to greater satisfaction.

In addition to practical functionality, these components align with Amana's commitment to sustainability. The company is focused on creating products that not only meet consumer needs but also adhere to environmental guidelines. This commitment is evident in the design and energy efficiency features of the W10572490A and W10562495A.

In conclusion, the Amana W10572490A and W10562495A stand out for their unique blend of durability, energy efficiency, and user-friendliness. As integral parts of Amana's appliance lineup, they contribute to improved performance and longevity, making them essential for any modern kitchen.

Amana W10572490A - SP, W10562495A manual Troubleshooting

Models: W10562495A W10572490A - SP