Nikon S1100pj Electronically Controlled Cameras, 187, Troubleshooting, Even when Date imprint is

Troubleshooting

Problem	Cause/Solution	A
Date not appearing on pictures	• Another function that restricts the Date	77
even when Date imprint is	imprint option is enabled.
	• The current shooting mode is one that does	149
enabled.
	not support Date imprint.
Camera settings reset.	Clock battery is exhausted; all settings were	146
	restored to their default values.
	Battery temperature is high. Turn off camera and
Monitor turns off, and the	allow battery to cool down before resuming use.
	After the lamp blinks for three minutes, the	21
power-on lamp blinks rapidly.
	camera will turn off automatically. Pressing the
	power switch also turns off the camera.
	• Battery of the remote control is exhausted.	7
	• Point the remote control at the infrared	48, 164
	receiver on the front or rear of the camera at
	the distance within approximately 5 m (16 ft.).
Camera does not respond to	• The remote control cannot be used when	74
	Smile timer is set to On in smart portrait
remote control operation.
	mode and the camera detects human faces.
	• The shutter may not be released when	–
	attempting to use the remote control to take
	pictures of scenes exhibiting severe
	backlighting.

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

Technical Notes and Index

187