Changing the Projector Settings (Projector Settings Menu)

kAuto Off

Pbutton (projector mode) M Tap the bottom tab M z (Projector settings menu) M kAuto off

If no operations are performed for a while during projection, camera ends projection and enters standby mode (A 21) for saving the power.

In this option, set the time allowed to elapse before the camera enters standby mode.

30 s, 1 min, 5 min (default setting), and 30 min can be selected.

CCanceling Standby Mode

When the camera enters standby mode from projector mode, press the power switch, shutter- release button or c button to activate playback mode.

Press the A button to activate shooting mode.

To resume projection, press the Pbutton again in playback mode or shooting mode.

CNotes on Auto Off

The time allowed to pass before the camera enters standby mode is fixed as follows:

During slide show playback with the loop option enabled: 30 minutes

When a setting screen or the projector settings menu is displayed: three minutes

Tone Compensation

Pbutton (projector mode) M Tap the bottom tab M z (Projector settings menu) M Tone compensation

Dark portions of pictures are brightened when projected.

On (default setting)

Dark portions of pictures are brightened when projected. The results of tone compensation vary depending on the picture.

Off

Tone compensation is disabled.

Using the projector

173

Page 187
Image 187
Nikon S1100pj Tone Compensation, 173, Changing the Projector Settings Projector Settings Menu, Canceling Standby Mode