Nikon S1100pj user manual Projecting Pictures, 163

Using the projector

Displaying Pictures with the Projector (Projector Mode)

The COOLPIX S1100pj is equipped with a built-in projector. The ability to project pictures and movies with simple operation makes for a convenient way of enjoying photos at gatherings of family and friends.

Projecting Pictures

1Place the camera.

Place the camera on a stable and level surface such as a table.

Point the projector window at a screen (available commercially) or flat white surface.

The projection distance between the camera and screen should be approximately 26 cm (10 in.) to 2.4 m (7 ft. 10 in.) (A 165).

2Turn on the camera and press the P

button.

The camera enters projector mode and a picture stored in the internal memory or on a memory card inserted into the camera is projected in full-frame playback mode.

The camera can also be switched to projector

mode by pressing the Pbutton on the remote control. The camera’s monitor turns off when the remote control is in operation. Tap the monitor to reactivate it and enable the camera’s touch operation (A 166).

3Adjust the camera position.

To change the projected picture size, adjust the distance between the camera and screen.

Adjust the projection angle to reduce picture distortion.

4 Adjust focus for the projected picture.

Turn off unnecessary lights.

Rotate the projector focus dial to adjust picture focus.

Using the projector

163