Adjusting the A (Auto) Mode setting

Preset Manual

Preset manual is effective with mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light).

Follow the procedure below to measure the white balance value according to the light source when shooting.

1Place a white or gray reference object under the lighting that will be used during shooting.

More on Shooting

2Tap the bottom tab to display the setting controls (A 16) and tap w.

OFF

AUTO

AUTO

0.0

3Tap b.

The camera zooms in to the position for measuring white balance.

White balance

Preset manual

4Frame the reference object in the measuring window.

To apply the most recently measured value for preset manual, tap Cancel.

Preset manual

Cancel

Measure

Measuring window

5Tap Measure to measure a value for preset manual.

The shutter is released and the new white balance value is set. No picture is recorded.

BNote on Preset Manual

Preset manual

Cancel

Measure

A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,

60set White balance to Auto or Flash.

Page 74
Image 74
Nikon S1100pj user manual Preset Manual, Tap b, Frame the reference object in the measuring window