Nikon S1100pj user manual GVibration Reduction, 150, When Continuous is set to Single

Setup Menu

Basic Camera Setup

gVibration Reduction

Tap the bottom tab (A 143) M Tap z (Setup menu) M gVibration reduction

Choose a vibration reduction option for shooting.

Vibration reduction reduces blur caused by slight hand movement known as camera shake, which commonly occurs when shooting with telephoto zoom applied or at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when taking still pictures.

Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.

On (hybrid)

The effects of camera shake are reduced optically using a lens-shift method. Additional image processing with electronic vibration reduction is applied to further reduce the effects of camera shake with recording of still pictures taken under the following conditions.

•When the flash does not fire

•When a shutter speed slower than 1/60 seconds is used

•When Self-timeris disabled

•When Continuous is set to Single

•When ISO sensitivity is set to 200 or less

On (default setting)

The vibration reduction using the lens-shift method only is enabled.

Off

Vibration reduction is not enabled.

The current vibration reduction setting can be confirmed in the camera monitor with shooting (A 12, 27). When Off is selected, no icon is displayed.

150