Nikon S1100pj Operations with TV Connection, Connecting to a TV, Connecting the Audio/Video Cable

Connecting to a TV

Connecting to Televisions, Computers and Printers

Operations with TV Connection

While pictures are displayed full-frame on the TV, the previous or subsequent picture can be viewed by dragging your finger across the camera monitor.

If the first frame of a movie is displayed, the movie can be played back by tapping the camera monitor.

•Tap the camera monitor to turn TV display off and display the picture in the camera monitor. When pictures are displayed in the camera monitor, tap the controls displayed to operate the camera.

•When the camera is connected to a TV, pictures cannot be displayed as thumbnails, picture display cannot be enlarged (playback zoom), and pictures cannot be cropped.

•Pictures will be automatically displayed on the TV in the following situations.

-No operations are performed for a few seconds.

-A slide show is played back.

-A movie is played back.

BConnecting the Audio/Video Cable

When connecting the audio/video cable, be sure that the camera connector is properly oriented. Do not use force when connecting the audio/video cable to the camera. When disconnecting the audio/video cable, do not pull the connector at an angle.

BVideo Mode

Be sure that the camera’s video mode setting conforms to the standard used by your television.

130Specify the Video mode setting from Interface option (A 155) in the setup menu (A 142).