-28-
• wep40: use 40-bit WEP data encryption
• wep40opt: use 40-bit WEP data encryption for 40-bit WEP-equipped clients
while allowing non-WEP clients associating to the WL1100B-AR Wireless
LAN Access Router as well.
set key1 key_text: set WEP Key#1 as key_text. 10 hexadecimal digits (0-9 or A-F)
heading by “0x” or five alphanumeric values (ASCII characters,
case-sensitive) are required if 40-bit WEP is used.
Example: 0x1122334455, 0x0055AA55AA, abcde, or MyKey.
set key2 key_text: set WEP Key#2 as key_text with a same format as WEP Key#1.
set key3 key_text: set WEP Key#3 as key_text with a same format as WEP Key#1.
set key4 key_text: set WEP Key#2 as key_text with a same format as WEP Key#1.
set usekey 1|2|3|4: Select the WEP key to be used for encrypting data transmission. Only
one key can be selected at a time.
list: Display current WEP settings.
Note: Your new WEP settings will take effect after resetting the WL1100B-AR Wireless
LAN Access Router.